Verylube Anticarbon

Description

Verylube Anticarbon
n
nCleaning engine from carbon.
nFast-acting product designed to remove carbon contaminations and restore stuck piston rings of gasoline and diesel engines.
n
nIt removes all scale and tar contaminations from the parts surfaces of cylinder-piston system.
n
nIt does not require oil changing after application.
n
nApplications
n1. Warm up the engine. The engine should be warmed but not hot.
n2. Unscrew the plugs (burners). Disconnect the wire of the ignition timing sensor, Hall sensor or commutator.
n3. Introduce the content of 1 tube Verylube Anticarbon into each cylinder through the plug hole. Screw the plugs back in. Wait for 10–20 minutes. Unscrew the plugs. Cover the plugholes with absorbing fabric to avoid flying-out dirt getting onto the paint. Rotate the engine with a starter for several seconds.
n4. Put the plugs (burners) back into position.
n5. Start the engine and let it work on the increased rotation frequency of a crankshaft for 15-20 minutes. During this time, the residues of the softened carbon will be removed through the exhausts system.
nDosage
n1 tube – 1 cylinder.
n
nNotes
nAvoid getting the substance onto lacquer coating.
n
nSafe for catalytic neutralizers, oxygen sensors, mechanical rubber goods and sealings.
n
nThe VERYLUBE Anticarbon in tubes can be used for engine oil system flushing:
n
n1. Introduce Anticarbon into the warmed-up engine through the oil-filler neck at a ratio 40 ml of Anticarbon for 3–5 liters of oil.
n2. Let the engine idle for 10–15 minutes.
n3. Change oil and oil filter.
n
nMore additives from XADO
n
nFollow us on Facebook