n
• Precise real-time tracking

n

• Built-in e-sim

n

• Multi-network connectivity

n

• Ignition detection alarm

n

• Remote immobilization

n

• Geo-fencing

n

• Motion detection alarms

n

• Tramigo Cloud App

n

Source: Tramigo

The post Tramigo car tracker – TF150 appeared first on Polishventure.

The post Headlight Bulb H4 100/90W appeared first on Polishventure.

• • removes oil and greasy residue

• • chemical conversion of lime

• • does not contain acids or alkali

• • compatible with antifreeze

• • neutral behavior on rubber and plastics

• • neutralizes acids

• • disperses sludge

Application
Add contents to the cooling water. Then start up the heater and, depending on the level of contamination, let the engine run at operating temperature for 10 – 30 min. After finishing cleaning, drain the coolant/cleaner mixture, thoroughly flush the cooling system with water and refill it according to the manufacturer’s instructions. The content (300 ml) is sufficient for 10 l of coolant (dosage 1:33).
Credits: Liquimoly
See more Cleaners & Degreasers

The post LIQUI MOLY Radiator Cleaner appeared first on Polishventure.

• • good water separation

• • good corrosion protection

• • cleans contaminated contacts

• • silicone-free

• • penetrates layers of oxides and sulphides

• • Liquimoly Electronic Spray drives out moisture

• • reduces contact resistance

Application
Spray components before installing them. If the contacts are heavily corroded, allow the product to act for longer and rub off corrosion residues with a cloth or brush.
Note: After spraying on, allow a flash-off period of 10 min. before connecting the component to a power supply.
Credits: Liquimoly
See more Cleaners & Degreasers

The post Liquimoly Electronic Spray appeared first on Polishventure.

• Liquimoly Catalytic-System Cleaner guarantees optimum combustion
• prevents corrosion in the fuel system
• protects the catalytic converter from clogging with soot
• cleans the intake tract, intake valves and combustion chamber
• guarantees low fuel consumption with long-lasting effect

Application Pour additive into the LIQUI MOLY Pump-spray Bottle (part no. 3316). Pump up the pump-spray bottle. Establish access to the intake tract, ideally behind the turbocharger. Please note that the access must be located immediately behind the air-flow sensor. Start the engine and spray the additive into the intake tract at short intervals while the engine is at moderate speed (2,000-3,000 rpm). If the speed does not begin to fluctuate, the intervals between spraying can be lengthened. If the speed fluctuates sharply (<700 rpm), shorten the intervals between spraying. For fine atomization, check regularly that the pump-spray bottle has sufficient residual pressure. LIQUI MOLY cannot offer any warranty if the product is not used as specified in the product information or if dosing systems other than those indicated here are used. It is the responsibility of the user alone to verify the suitability of alternative dosing systems. To ensure optimum cleaning of the fuel system, we recommend adding Catalytic-System Clean (part no. 7110) to the fuel immediately after applying the additive. This will safeguard the cleanness of the complete engine system including the exhaust gas system. Credits: Liquimoly See more Cleaners & Degreasers

The post Liquimoly Catalytic-System Cleaner appeared first on Polishventure.

The post Liquimoly Air Flow Sensor Cleaner appeared first on Polishventure.

n
• absolutely free of chlorine

n

• removes oil and grease-based contaminants

n

• low surface tension

n

• leaves no residues

n

• high proportion of active components

n

• controlled evaporation free of residues

n

• dissolves resin and tar-type residues

n

• optimum penetration capacity

n

• optimizes economical use

n

• universal application

n

• contains no acetone

n

Application
Spray Liquimoly Brakes & Parts Cleaner on contaminated components and allow them to drain. After the solvent has evaporated, the components will be clean and free from grease
Credits: Liquimoly
See more Cleaners & Degreasers

The post Liquimoly Brakes & Parts Cleaner appeared first on Polishventure.

n
• removes carbon deposits from intake valves and combustion chamber

n

• guarantees low fuel consumption

n

• optimum dosage

n

• reduces pollutant emissions

n

• tested for turbochargers and catalytic converters

n

• cost-effective due to exact dosage

n

• cleans the injection system

n

Application
n300 ml Liquimoly Injection Cleaner is sufficient for 70 l of fuel. Has a long-term effect of 2,000 km. Can be mixed with fuel at any time since mixing takes place automatically.
Credits: Liquimoly
See more Cleaners & Degreasers

The post Liquimoly Injection Cleaner appeared first on Polishventure.

n
• fast and long-lasting effect

n

• eliminates bad smell from air conditioning

n

• fresh subtle orange scented

n

Product Description
BIZOL AC Clean+ c30 effectively cleans the home and vehicle air conditioning systems. It has a fresh and subtle orange scent as well as long-lasting smell protection. We recommend cleaning the air conditioning system every 6 months. A special adapter is enclosed.
Applications
Spray into the air inlet of the air conditioner
How to use
The aerosol should have room temperature. Best processing temperature is 5 to 30°C. Before use, shake the aerosol. Before treatment, switch off the engine and the electrical installations. Apply the foam to the condenser of the air conditioning by means of the enclosed adapter. Insert the adapter about 30 centimeters into the air inlet of the air conditioning and completely empty the can. The location of the air inlet differs per brand. After applying, do not switch on the engine or the electrical installation
Credits : Bizol
See more Cleaners & Degreasers

The post BIZOL AC Clean+ c30 appeared first on Polishventure.

The post Nissan Tiida Windbreakers appeared first on Polishventure.